Solmeta Geotagger N3 a brand new photo-GPS unit which is especially made for Nikon DSLR cameras ,records latitude, longitude, altitude, heading and Coordinated Universal Time (UTC) to your photographs. The GPS information will be directly embedded into the EXIF of pictures took by its compatible cameras. The Geotagger N3 can be used with: Nikon D800, D800E, D4, D3-series, D700, D300-series, D2X, D2XS, D2HS, D200, D90, D5000, D7000, D3100, D5100, D3200 and D600.
Geotagger N3 is Solmeta latest GPS product, with the advanced GPS technology, sharp and graceful outlook design and the brilliant features.
· Fixed spiral connection cable
The big difference of Geotagger N3 is the fixed connection cable design, each mode is specially for one type connection port. The spiral cable is soft and can be extended.
· 3 aixs electronic compass
The big advantage of the GPS receiver is its built in 3 axis electronic compass. The difference between 3 axis compass and normal compass is its accuracy.
For other compass , it provide accurate data only when it is placed horizontally .while for N3 with 3 axis compass, it is able to record accurate even when it is tilted in certain degree.
Notes: Nikon D200 doesn't support heading record.
· Advanced chipset of N3
Another feature of geotagger N3 is the most advanced Chipset MTK MT3329 which has 66 parallel searching and 22 tracking channels for a fast acquisition and reacquisition.
Meanwhile, geotagger N3 consumes less than 60mA from the camera and it also can be automatically powered up and powered down along with Nikon camera exposure meter, which making it one of the most power-efficient GPS receiver for Nikon cameras.
· Indoor fixed” function
When you go indoor or to a place without GPS signal or GPS got blocked out , N3 will automatically reuse the last known position for tagging the subsequent images.
· Unique “wake up and sleepping” working mode
The Geotagger N3 is powered from Nikon camera directly. A special work mode applied for low power consumption and maximum latest GPS data using. Even on the status of camera’s off, This working mode enable “camera off and GPS stays on “ which is very convenient for photographer. Under that circumstance, photographer is able to gain much more new GPS data.
· Support remote controller
Supplied 2.5 jack remote pass-through allows you to use the remote trigger when the Nikon camera remote port is used by Geotagger N3.
Chipset: MTK MT3329
Channels: 66 parallel searching, 20 Tracking channels
Tracking Sensitivity: -159dBm
Data format : NMEA 0138 ASCII
3 Axis electronic compass: Azimuth Range 0-359°
Battery: <60mA(normal working mode)
Dimension (L x W x H): 56 mm x 36mm x 19mm
Weight: 50g (1.8 oz.)
Two ways connection
The Geotagger N3 can be connected to Nikon camera in two ways:
· Mount on camera hot shoe.
· Attach to camera strap with supplied strap fastner.
For more details, please download Solmeta Geotagger N3 User manual.